From a420d0151052a03d0d68d23a65243c394d754d37 Mon Sep 17 00:00:00 2001
From: grace-xing6 <yaxinxin@buffalo.edu>
Date: Sun, 6 Oct 2024 17:45:18 -0400
Subject: [PATCH] spiderweb with spider finished

I wrote two saparate files to draw spider and spiderweb, then I found that they work individually but cannot draw together in drawing py
I tried to 1) change the variable in spider to make it align with spiderweb, not work
2) write them into one file and call their function at end, it work but does not work well
Then I realized that it's position thing, when I finish drawing spiderweb, I didn't put the direction back

So I tried to fix this in spiderall and it worked;
Then I think it should also work in drawing project, which then works too!

future project might be make the spider gif from up to down and make firework effect
---
 __pycache__/spider.cpython-310.pyc    | Bin 0 -> 1550 bytes
 __pycache__/spiderall.cpython-310.pyc | Bin 0 -> 3041 bytes
 __pycache__/spiderweb.cpython-310.pyc | Bin 1561 -> 1512 bytes
 drawing.py                            |  20 ++++-
 spider.py                             |  65 ++++++++++++++
 spiderall.py                          | 121 ++++++++++++++++++++++++++
 spiderweb.py                          |  11 +--
 7 files changed, 209 insertions(+), 8 deletions(-)
 create mode 100644 __pycache__/spider.cpython-310.pyc
 create mode 100644 __pycache__/spiderall.cpython-310.pyc
 create mode 100644 spider.py
 create mode 100644 spiderall.py

diff --git a/__pycache__/spider.cpython-310.pyc b/__pycache__/spider.cpython-310.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..ebb16554bb26a60c0a33a8c7f419835d560fb957
GIT binary patch
literal 1550
zcmZuxL2n~96t+E{$uw!Zt5sPc4#+DG>>$*zz;T6;wnB(QIV=b%5=4`+J2jn*gY9gZ
zDm`_tNSycq+z?lO!u|q|KEf$Cj)+Tn&y#KgtfTil@A*0N-uJ#YW^b=gV7=f;{Y#IK
zKhW4-2^b%PxKBVyB56au=ytl<*=9%oKqitur=vusGJ8%&T=rxRdn$KiANEYLr=-|j
z!+(*22Kvr%#qoKw@EPR^NPM9uSA-HzS9HZz<aKhzz+&iICHB5gR>>6w506plil7B2
z4}69mNuNe3*u_^zwp@r(RN7XJ5)185g+EoI*3VQcY$^5JiPA^k!}E8=vJf-lwAZFR
z6ray<FPmm5PIS|Bw=2^adw5**LON6Jd=_|Zya_!pq*=6K2SZ~}=ucFw+c7#q)@2ZK
z2#cPAhpc;lpyz=uLmDsrOzb|O@b_oKFP*Y(SlhBv!z1O+yqOKB<(Y2lF_tl|j8wzv
zqIxu(x7t4%&aC-XRemg?Vh9?#nU=~P&X!?-u5p(D^qRN>P#N2&8RaYooion*lwaGs
za8QB#Yh_@?&b$W?9*~s`1RDN5haM1UIg=SQyt8R{ew9EU2sAxEUO$F=>o-A-cx~0P
zpmq;En1!XFLON;6>a1Y#{b47j+o;+_D7Mrc4DPDws=E&khxy%2@MqDk5>Ph_&t5X?
z8!#ljOdw~5jH!uCexjFr#gE9>;xhF#@`)kqBIA-(+VQMom`~$5->|QX&N}P6UCE)^
z^x{)woD-P7aK5x2dLd4%nMRJyl+{z^l@;bBIwrclA?L%crnjA#7`ZIg??bw4OuoqV
zi|gxa{X3`#n7xNbKce~-)o-Z&1ckIjCOUngEaG7Ce&{;|qzAIMb?BWKyC|)+DW2pL
z03OXEv-m-<15~@9Mtvw@+^Dwpr=zTF>qfbd#{EAXv9Ce+0}%HHC}dQg<Se6o3Qx!`
z5Mb9|G46lt!YrTQ<qtvK%sq1GcIG{DDv9>yyCAvbXv-8Z&n`xYxhO@WTXl;y49u%g
zMj#5|O@zNv?N&3~6o&m}J7O0i)cOaY>G~WJjPM^9$t}1M$1Ox~dTk`?K{s}$ZDB0o
zLo&wnKEP5D-wY-WamnaDwQqr=pxC|4&#iA%7`QobWn&y{8HZEzOidx}I4qIz5!m=2
fugoKVJT-FOsE=^g9FBNSuroR9v;0mz*uD1;fe~!2

literal 0
HcmV?d00001

diff --git a/__pycache__/spiderall.cpython-310.pyc b/__pycache__/spiderall.cpython-310.pyc
new file mode 100644
index 0000000000000000000000000000000000000000..121532c4b79d74ebc23efe769a6fc512a7c69fcc
GIT binary patch
literal 3041
zcmZuzO>f*p81{H<ud~^tX(^=z0p<X$p(K0>5Fmu00xn$+1tF~jE5|c&+<5KH%!D-2
zMnZ%u5+}}p#G!Y70>6Nxk8s)>HxLqp=bhPXHh``99*^I7-sgE|nw6EVhvx^*i{Yy0
z{Ys6+hokWpl0HNxJi#jOLszm{>3`@IUdDwl_?O-w5P=9$h9VLjl#z(V63UL~ie;3s
zxGGk}>X&S=Brb?G^mN5VaS7$JctBi6*%J?nD=1gwig@UlF;DdFc<Hq%{_mx%Wl!gf
zs<X#O86drbq+dp6V59JledZY^_%XZXeRAQ58Gqu@T84|jmh)M=OTxqYVSoDl-zO*2
zPqFwk#5x6%=Y9V2TWQept?Hl+RaO_WeL$#ef2d_KlC_aySe3QJSXpeF)Nhw{Ddez{
zbz!#KfExEb)x$!6-ro2~OQkmomF05dmef0@8E=fTow6>5`=!|)=8cdWqy7B(jlH@w
z&u@%Xb64hONI%4+4L!zkDyypX@j<&{&DfWl)_@3q(Da+G-(xY}9t-|b@TYeUECOl{
z*4t=I0K+5R5i7hSpMaae#SNRF4!Hbdk9iaSTW*45?>qGDc1`##pZHW4K7iwguiS!x
zI>{1(BB8A$FC}t!FRPLnOc<<1GRoABPRzDU#!XopJtb56X{0(R+s;;__A@2gF3lU-
zDQ%RE$FdeJA2+(aI9m;4x-?}|>oicr-ofhWhy#AGLYAERNDn%*Ve1H&t>7~iBfEg4
z38>f)fLhEVwu;w|<>)^5kQgk{=z}w&2@V{B!zXXs4Q6h8NoMR`^F5`&l%#6%jEq)9
zt~T7PvV5lxK6BBS1;faR%3603wTF>3QGC@`)IMhsSwo9ii@rc*?!niNsP0>DzIX&*
z3jPq<SIEm~U4!4Rc_KgxcYOU6`utfRM_;t#tLyNy^}VrNaHEzH-~q|#>>KLc?d}Gm
z0~F%J*WYRC8nktu&KvArkDFS6!KZYX`9Ep4l1$u%90(qGOe^w+1!zhdS2m+<Do2&j
zQbk=xPaA?5d*e1J8q>5LVo9@Kr@Uol%kB=MTHZ6my9>Y)rtMnpjGJ@gG4$#y$a=g7
z_uue+7Wr!+!6oMZ9-OF0F?3EsWD+^Vf_@1V128QxjDVq7a-a26--^$EexF&A{@axJ
zRKV+4MAQCa)@3R|rJqyt^r1Q>`^R@tF`jh+963Q$yXx6k=Y-1D6~iZpdT^0*ROqam
zaP@?VtcC0jgbr8vhaZ!0lPt+gl~*(6l01v@Gg&7p6XhP1>u7xA-p%A7h3A~~){_s$
z#AZaJgJi3$DyRFrsT#H3Pdn-=3{}@CBM!GqG{=s%-A!4P^^iK+$o;yF;Xd1gU>ms~
zx9nca5OwWG{|0Z_g6BSd73*uFMC7l+ae+@7hMN5@g9B3x<Vfcp3YQkn=TLDv#-V|u
z;i~|^K`D6Y0CR0d2MS^%ckWF){plO{Zc5x41cj0ZDN{GlaD06bHTa)?+%8!=D_Q7;
z9n2-(x^1|){vPIQGHfka<7-?!i)zl1ojx=+=fS6F2zJDs%o$EA!M|rm!6d+WmmG!0
zvJs~qIAZz1C!u4-jIE*NP%z_)n;p5<ZchZ@M|k)?@k1wMexgmL3~6{vH6s_qr7B0#
zNJTm(+H97^DV1)xJzdwyW+M*L=?gH|iaU+VpH5Cr%3qK<xSqk#^c%{4r0i$PenSQl
zSy}7yP@b`=?P`gCftq!p)-cV{E8avjrPBka$&=Lk6lK?u4Z1LYb|4QToZywzZD`8{
zm)L-N6VvY?X<{tVDCV&rL6mf$f>KDJ)E|oG{fAQIDNCuBP&rlT{3hZ;DG`ZVZ_E^o
zyHY@H5d!b%a4^%OJxAv_<C^e)2onftVj6eI&|PHi2t9%<=dQ3GPy}=NHC=A*p=P1)
zr~C|9i{k<!XC%GswB`aQByTSq5{uXiM+BJ>E_7@vlHz}&<s2EhaGZ~p2C{;%=&r`;
z@^KcmEIVzyG96owZS10(n%}q9r%N_gF6@AiciSNCSYz7mHttMjPnk-#foN)}9;Y$8
zyR$8JXp3M}jWJC@-T9hw_aZRAj_&d%092&=bhV9U%P#A^u~f6h<%P!jsQFCNEzurW
z?m(a`hds&d(cpGKk;2N|GRxX+|F&S|nW^y`qekpi@=ZF3G?@~^+SrD@cqv|vgLtjm
OjW5K#_)@&oTmA<_OqL)3

literal 0
HcmV?d00001

diff --git a/__pycache__/spiderweb.cpython-310.pyc b/__pycache__/spiderweb.cpython-310.pyc
index 7ed932e1f9abe3c840123bca62e774414e76e568..cad5b7e4feb46583943b0bbdc0388af9a407838c 100644
GIT binary patch
delta 72
zcmbQq^Mac<pO=@50SE#ZnbTKJ<dtRgn5gZ}mckRvpvk+j=QRtnpC;$zdREWLw^)_M
Ygn$Y;7&sU?7+IKrBqs+q2Mdn?05_Zr<NyEw

delta 122
zcmaFCJ(GtwpO=@50SI#6F{Q7Y$ScbjGf~@JDwQLJr<swFA(gY40Z4Lz$Q0gS22H+=
z6|Y%1GAA%HF!*V5Pfla?6uQNgk(rWOQd(4!lX{CKB|k59@_JTf83~}F91I+c9E>bX
TK$4S#n}dZzfP<Bdk&6)k2oxFT

diff --git a/drawing.py b/drawing.py
index 3c244bf..ed32c6e 100644
--- a/drawing.py
+++ b/drawing.py
@@ -4,11 +4,25 @@
 #
 # (Halloween Theme with Spider exploding)
 
+
 from turtle import *
 from superturtle import *
 from superturtle.movement import *
+from spider import *
 from spiderweb import *
 
-draw_web(400)
-hideturtle()
-done()
+
+def drawing(side_length): 
+    draw_web(side_length)
+    penup()
+    goto(0, 0)
+    setheading(0)
+    pendown()
+    draw_spider()
+    draw_connection_line()
+    hideturtle()
+    done()
+
+drawing(300)
+
+    
\ No newline at end of file
diff --git a/spider.py b/spider.py
new file mode 100644
index 0000000..f3a38e9
--- /dev/null
+++ b/spider.py
@@ -0,0 +1,65 @@
+from turtle import *
+from superturtle import *
+from superturtle.movement import *
+
+from turtle import *
+
+def draw_circle(radius, x, y, color=None):
+    "Draw a circle with the given radius at the (x, y) position. Optionally fill with color."
+    penup()
+    goto(x, y - radius)  # Move to the correct start point
+    pendown()
+    
+    if color:
+        fillcolor(color)  # Set the fill color
+        begin_fill()  # Start filling the circle with color
+    
+    circle(radius)  # Draw the circle
+    
+    if color:
+        end_fill()  # End the filling
+
+def draw_spider():
+
+    # Step 1: Draw the big circle (spider body) on top of the small circle
+     draw_circle(60, 30, 60, color="grey")  
+
+    # Step 2: Draw the small circle (spider head)
+     draw_circle(20, 30, 0, color="black")  
+
+    # Step 3: Draw legs on big circle
+     draw_legs(60, 30, 60)
+
+def draw_legs(radius, x, y):
+    "Draws legs starting from the perimeter of the big circle (spider's body)"
+    leg_length = 50  # Length of the legs
+    pensize(4)
+    
+    # Draw legs at equal angles from the top of the big circle
+    angles = [-60, -30, 0, 30, 150, 180, 210, 240]  # Angles for legs (top-left, top-right, and bottom)
+    
+    for angle in angles:
+        penup()
+        goto(x, y)  # Go to the center of the big circle
+        setheading(angle)  # Set the heading to the desired angle
+        forward(radius)  # Move forward to the perimeter of the big circle
+        pendown()
+        forward(leg_length)  # Draw the leg
+        penup()
+        backward(leg_length)  # Move back to the perimeter of the big circle
+
+def draw_connection_line():
+    "Draw a line from the top of the big circle (head) to the center of the small circle (body)"
+    penup()
+    goto(30, 400)  
+    pendown()
+    goto(30, 120)  # Draw a line to the center of the small circle (spider's body)
+    penup()
+    goto(0, 0)
+
+# Draw the spider
+# draw_spider()
+# draw_connection_line()
+# hideturtle()
+# done()
+    
\ No newline at end of file
diff --git a/spiderall.py b/spiderall.py
new file mode 100644
index 0000000..17c6680
--- /dev/null
+++ b/spiderall.py
@@ -0,0 +1,121 @@
+from turtle import *
+from superturtle import *
+from superturtle.movement import *
+
+segment_positions = [] 
+def draw_web_line(side_length):
+    global segment_positions
+    fly(-350, 350)
+    for side in range(5):
+        draw_segmented_line(side_length)
+        right(22.5)
+        fly(-350, 350)
+        #right(22.5)
+        
+def draw_segmented_line(side_length):
+    "Draws a line with 4 equal segments and marks the points"
+    segment_length = side_length / 4
+    line_segments = []
+    for segment in range(4):
+        forward(segment_length)
+        mark_point()  # Mark the points at each segment
+        line_segments.append(pos())
+    segment_positions.append(line_segments)
+
+
+def mark_point():
+    "Marks a point at the current location"
+    dot(5, "black")  # Draw a dot to mark the segment points
+
+def connect_segments():
+    "Connects the corresponding segment points of adjacent lines"
+    global segment_positions
+    for i in range(4):  # Iterate over the 4 segments
+        for j in range(5):  # Iterate over the 5 lines
+            next_j = (j + 1) % 5  # To wrap around to the first line after the fifth
+                        # Skip connections if either segment is near the x-axis or y-axis
+            if segment_positions[j][i][0] == -350 or segment_positions[next_j][i][1] == 350:
+                continue
+
+            penup()
+            goto(segment_positions[j][i])  # Go to the current segment
+            pendown()
+            goto(segment_positions[next_j][i])  # Draw a line to the next segment
+
+# Main function to draw the web
+def draw_web(side_length):
+    draw_web_line(side_length)
+    connect_segments()
+
+
+# Draw the web lines
+# draw_web(300)
+# hideturtle()
+# done()
+
+def draw_circle(radius, x, y, color=None):
+    "Draw a circle with the given radius at the (x, y) position. Optionally fill with color."
+    penup()
+    goto(x, y - radius)  # Move to the correct start point
+    pendown()
+    
+    if color:
+        fillcolor(color)  # Set the fill color
+        begin_fill()  # Start filling the circle with color
+    
+    circle(radius)  # Draw the circle
+    
+    if color:
+        end_fill()  # End the filling
+
+def draw_spider():
+
+
+    # Step 1: Draw the big circle (spider body) on top of the small circle
+     draw_circle(60, 30, 60, color="grey")  
+
+    # Step 2: Draw the small circle (spider head)
+     draw_circle(30, 30, 0, color="black")  
+
+    # Step 3: Draw legs on big circle
+     draw_legs(60, 30, 60)
+
+def draw_legs(radius, x, y):
+    "Draws legs starting from the perimeter of the big circle (spider's body)"
+    leg_length = 50  # Length of the legs
+    pensize(4)
+    
+    # Draw legs at equal angles from the top of the big circle
+    angles = [-60, -30, 0, 30, 150, 180, 210, 240]  # Angles for legs (top-left, top-right, and bottom)
+    
+    for angle in angles:
+        penup()
+        goto(x, y)  # Go to the center of the big circle
+        setheading(angle)  # Set the heading to the desired angle
+        forward(radius)  # Move forward to the perimeter of the big circle
+        pendown()
+        forward(leg_length)  # Draw the leg
+        penup()
+        backward(leg_length)  # Move back to the perimeter of the big circle
+
+def draw_connection_line():
+    "Draw a line from the top of the big circle (head) to the center of the small circle (body)"
+    penup()
+    goto(30, 400)  
+    pendown()
+    goto(30, 120)  # Draw a line to the center of the small circle (spider's body)
+    penup()
+    goto(0, 0)
+
+def drawing(side_length): 
+    draw_web(side_length)
+    penup()
+    goto(0, 0)
+    setheading(0)
+    pendown()
+    draw_spider()
+    draw_connection_line()
+    hideturtle()
+    done()
+    
+drawing(300)
\ No newline at end of file
diff --git a/spiderweb.py b/spiderweb.py
index d755ba7..59f838e 100644
--- a/spiderweb.py
+++ b/spiderweb.py
@@ -36,7 +36,7 @@ def connect_segments():
                         # Skip connections if either segment is near the x-axis or y-axis
             if segment_positions[j][i][0] == -350 or segment_positions[next_j][i][1] == 350:
                 continue
-            
+
             penup()
             goto(segment_positions[j][i])  # Go to the current segment
             pendown()
@@ -47,8 +47,9 @@ def draw_web(side_length):
     draw_web_line(side_length)
     connect_segments()
 
-# Draw the web lines
-draw_web(400)
-hideturtle()
-done()
+
+# Draw the web lines
+# draw_web(300)
+# hideturtle()
+# done()